Installation guide

34
Release Notes for Cisco Configuration Professional 2.7
OL-29505-01
Caveats
CSCth67558 Unable to discover switching
module.
Symptom Cisco Configuration Professional fails to discover switching
module and reports that the module is being reloaded in the discovery
details.
Conditions When the switching module is configured with login local or
AAA new-model configuration or both, the module requires one more
level of authentication along with the usual authentication. In this case,
you need to provide the username and password twice to get into the
module prompt.
Workaround Remove the login local and AAA new-model configuration
so that the extra level of authentication is not required.
CSCth34158 Switching Modules folder is
not listed in the left navigation
pane.
Symptom Switching Modules folder is not listed in the left navigation
pane even when the device has supported switch modules that are
managed by Cisco Configuration Professional.
Conditions
•
Multiple levels (more than one level) of authentication is required
for accessing the switch module console.
• Enabled password is configured on the device.
• AAA is configured on both the router and the switch modules.
• Privilege level 15 is not configured under line con 0.
Workaround
•
Ensure that the router and switch have the same username
(privilege level 15) and a password is configured when switch
console requires authentication.
• If there is no login configured for line con 0, ensure privilege level
15 is configured under line con 0.
• If AAA is configured on the router, make sure that no
authentication is required for the switch module and privilege level
15 is configured under line con 0.
Table 11 Open Caveats in Cisco CP 2.7 (continued)
Bug ID Summary Additional Information