Installation guide

32
Release Notes for Cisco Configuration Professional 2.7
OL-29505-01
Caveats
CSCto83180 Multiple virtual machines
(VMs) installed on SRE-V are
not displayed.
Symptom
•
Case 1—If you did not select a virtual machine in Configure >
Interface Management > Module Configuration > SRE-V >
Permissions > User/Group > Edit, Select is displayed.
• Case 2—Adding one more virtual machine using Configure >
Interface Management > Module Configuration > SRE-V >
Permissions > User/Group > Edit removes the previously added
virtual machine configuration.
• Case 3—Multiple entries are shown in the SRE-V Permissions
screen for each user/group.
Conditions
•
Case 1—In Configure > Interface Management > Module
Configuration > SRE-V > Permissions > User/Group > Edit,
when you do not select a virtual machine from the drop-down
menu, Select is displayed.
• Case 2—When the user/group already has one virtual machine
associated with it, adding one more virtual machine using
Configure > Interface Management > Module Configuration >
SRE-V > Permissions > User/Group > Edit can remove the
previously added virtual machine configuration.
• Case 3—When a virtual machine, for example VM1 is already
added to the user/group, adding one more virtual machine may
create multiple entries in the Permissions summary screen upon
refreshing the page.
Workaround
•
Case 1—There is no workaround. Assume that the default virtual
machine Host is associated to the user/group when Select is
displayed.
• Case 2—To add multiple virtual machines to the user/group, use
the CLI.
• Case 3—Read each entry as corresponding to one instance of
virtual machine associated with the user/group.
Table 11 Open Caveats in Cisco CP 2.7 (continued)
Bug ID Summary Additional Information