Installation guide

30
Release Notes for Cisco Configuration Professional 2.7
OL-29505-01
Caveats
CSCtu13147 IPS Auto update screen does
not display the complete
configured information.
Symptom Configure the IPS Auto Update settings using the Local
Server option. Rediscover the device, part of the configured
information related to recurring update schedule is missing from the
Edit IPS > Auto Update > Local Server screen.
Conditions This problem is seen when you configure the IPS Auto
Update settings using the Local Server option and configure the Update
Schedule by selecting the Setup Recurring Update checkbox. The IPS
Auto Update screen does not display the complete configured
information when you rediscover the device and navigate to IPS Auto
Update screen.
Workaround There is no workaround.
CSCto88259 GenericJDBCException seen
while launching Cisco
Configuration Professional.
Symptom The following error is seen when Cisco Configuration
Professional is launched:
org.hibernate.exception.GenericJDBCException: Cannot open
connection
Conditions This problem rarely occurs and there are no specific steps
which create the problem. Database corruption is a possibility.
Workaround Reinstall Cisco Configuration Professional.
CSCto70309 Unified Communications mode
is displayed as CUBE when the
mode border-element
command is not configured.
Symptom On an ISR-G2, if the mode border-element command is not
configured under voice service voip and if telephony service and
max-dn commands are configured, Cisco Configuration Professional
displays the Unified Communications feature as CUBE.
Conditions This problem occurs only on an ISR-G2 if the mode
border-element is not configured and if max-dn is configured under
the telephony-service command.
Workaround Select the appropriate mode in the Unified
Communications Features screen and deliver the CLI.
CSCto07804 Traffic Monitoring Netflow
Services fails to start in some
scenarios.
Symptom Data Collector Service fails to start as a result of which data
is not collected from the router.
Conditions This can happen if files are not copied properly or get
corrupted while installing the Data Collector Service.
Workaround Reinstall the Data Collector Service.
Table 11 Open Caveats in Cisco CP 2.7 (continued)
Bug ID Summary Additional Information