Installation guide

29
Release Notes for Cisco Configuration Professional 2.7
OL-29505-01
Caveats
CSCtt45687 The VPN design guide does not
launch on the Google chrome
browser.
Symptom The Cisco Configuration Professional does not display the
VPN design guide when you select Configure > Security > VPN >
VPN Design Guide.
Conditions This problem is seen when the Google chrome browser is set
as the default browser in the system.
Workaround Set Mozilla Firefox or Internet Explorer as the default
browser in your system.
CSCtw61469 Cannot configure the SIP trunk
on Cisco 892F router.
Symptom You cannot configure the SIP Trunk on a Cisco 892F-CUBE
ISR device. Resetting the Unified Communication mode to default and
changing the CUBE settings is not successful due to CLI error.
Conditions This problem occurs only when a Cisco 892F-CUBE ISR
device is configured with CUBE feature. Cisco Configuration
Professional does not allow you to configure or unconfigure the SIP
trunk on the device.
The following CLIs cannot be configured or unconfigured on the
device:
• call threshold global cpu-avg low 68 high 75
• no call threshold global cpu-avg low 68 high 75
• call threshold global total-mem low 75 high 85
• no call threshold global total-mem low 75 high 85
Workaround Configure the SIP Trunk manually or follow these steps.
1. Discover the Cisco 892F-CUBE ISR with Unified
Communication mode as CUBE.
2. Navigate to SIP Trunks.
3. Select the service provider and provide inputs for the available
parameters.
4. Save the generated CLI preview in a text file.
5. Use the Config Editor to upload the file after removing the
above mentioned CLIs and apply the config.
Table 11 Open Caveats in Cisco CP 2.7 (continued)
Bug ID Summary Additional Information