Installation guide

28
Release Notes for Cisco Configuration Professional 2.7
OL-29505-01
Caveats
Resolved Caveats
Table 10 lists caveats that are resolved in Cisco Configuration Professional Version 2.7.
Open Caveats
Table 11 lists caveats that are open in Cisco Configuration Professional Version 2.7.
Table 10 Resolved Caveats in Cisco CP 2.7
Bug ID Summary
CSCtu18162 Editing the non-persistent backup to persistent does not remove the cellular route
CSCto13265 Site-to-site VPN displays duplicate tunnel entry
CSCtn10781 Overlaid extensions do not follow the order you specified
Table 11 Open Caveats in Cisco CP 2.7
Bug ID Summary Additional Information
CSCue49702 Configured 3G cellular
interfaces are not displayed on
the NAT page
Symptom Cisco Configuration Professional does not display the
configured 3G cellular interfaces on the NAT page.
Conditions This issue is encountered on devices with Wireless AP,
where 3G cellular feature is configured.
Workaround Rediscover the device.
CSCug01227 GetVPN key server
configuration details are not
reflected on the GUI after
successful configuration
Symptom The configuration details of the GetVPN key server are not
displayed on the GUI.
Conditions This error is encountered on devices with IOS version 15.2
or higher, and IOS-XE version 15.3 or higher.
Workaround Rediscover the device.
CSCtw51884 The create/edit/delete action
fails on the GSM profile screen
when the hostname has the +
character.
Symptom The Create, Edit or Delete action fails on the GSM profile
screen and Cisco Configuration Professional displays this error
message Error has occurred while configuring Cellular GSM modem
profile. However, Cisco Configuration Professional configures the
router successfully.
Conditions This problem is seen when the hostname of the router has
any illegal character. For example: !,@, #, $,%, ^, &, *, (), and +. For
example, C881GW+7 is not a valid hostname.
Workaround .Remove the illegal characters from the hostname and
rediscover the device.