Installation guide

Release Notes for Cisco Configuration Professional 2.7

OL-29505-01

Limitations and Restrictions

• GRWIC-VA-DSL-A

• GRWIC-VA-DSL-B

• GRWIC-VA-DSL-M

• GRWIC-ISDN-1B-U

• GRWIC-ISDN-1B-S/T

• VWIC3-1MFT-T1/E1

• VWIC3-2MFT-T1/E1

• VWIC3-4MFT-T1/E1

Limitations and Restrictions

This section describes restrictions and limitations that may apply to Cisco Configuration Professional.

It contains the following sections:

• Cisco Configuration Professional Minimum Screen Resolution, page 23

• JRE Settings for Cisco Configuration Professional, page 23

• Pop-up Screens Appearing on Primary Monitor if Cisco Configuration Professional Is Moved to

Extended Monitor, page 24

Cisco Configuration Professional Minimum Screen Resolution

Cisco Configuration Professional requires a screen resolution of at least 1024 x 768.

JRE Settings for Cisco Configuration Professional

The following JRE settings are needed for Cisco Configuration Professional to function properly:

Step 1 Go to Start > Control Panel > Java.

Step 2 Click View under Java Applet Runtime Settings.

Step 3 Select your JRE in use.

Step 4 Set the "Java runtime parameters" with the value "-Xmx256m -Dsun.java2d.d3d=false".

In addition, if JRE is upgraded to versions 1.6.0_11 or above, following settings are needed after Cisco

Configuration Professional installation.

Step 1 Go to Start > Control Panel > Java > Advance.

Step 2 Select "Java Plug-in" tree.

Step 3 Uncheck the check box for Enable next-generation Java Plug-in.

Step 4 Restart Cisco Configuration Professional.