Specifications

xxviii
Cisco 1751 Router Software Configuration Guide
OL-1070-01
Syntax Description
Default
No port is preconfigured.
Command Mode
Dial-peer configuration.
Usage Guidelines
Use the port configuration command to associate the designated voice port with the selected dial peer.
This command is used for calls incoming from a telephony interface to select an incoming dial peer and
for calls coming from the VoIP network to match a port with the selected outgoing dial peer.
This command only applies to POTS peers.
Example
The following example associates a dial peer with slot 0 and access through port 0:
dial-peer voice 10 pots
port 0/0
prefix
To specify the prefix of the dialed digits for this dial peer, use the prefix dial-peer configuration
command. Use the no form of this command to disable this feature.
prefix string
no prefix
Syntax Description
Default
Null string.
slot-number Slot number in the router where the VIC is installed. Valid entries are
from 0 to 2, depending on the slot where it has been installed.
port Voice port. Valid entries are 0 or 1.
string Integers representing the prefix of the telephone number associated
with the specified dial peer. Valid numbers are 0 through 9, and a
comma (,). Use a comma to include a pause in the prefix.