Specifications

xviii
Cisco 1751 Router Software Configuration Guide
OL-1070-01
Usage Guidelines
VoIP monitors the quality of voice received over the network. Use the expect-factor command to
specify when the router generates an SNMP trap to the network manager.
This command only applies to VoIP peers.
Example
The following example configures toll quality of voice when connecting to a dial peer:
dial-peer voice 10 voip
expect-factor 0
fax-rate
To establish the rate at which a fascimile (fax) is sent to the specified dial peer, use the fax-rate
dial-peer configuration command. Use the no form of this command to reset the default value for this
command.
fax-rate{2400 | 4800 | 7200 | 9600 | 14400 | disable | voice}
no fax-rate
Syntax Description
Default
voice.
Command Mode
Dial-peer configuration.
Usage Guidelines
Use the fax-rate command to specify the fax transmission rate to the specified dial peer.
2400 Fax transmission speed of 2400 bps.
4800 Fax transmission speed of 4800 bps.
7200 Fax transmission speed of 7200 bps.
9600 Fax transmission speed of 9600 bps.
14400 Fax transmission speed of 14,400 bps.
disable Fax relay transmission capability disabled.
voice Highest possible transmission speed allowed by voice rate.