Specifications

xiv
Cisco 1751 Router Software Configuration Guide
OL-1070-01
Syntax Description
Default
No dial peer configuration mode is preconfigured.
Command Mode
Global configuration.
Usage Guidelines
Use the dial-peer voice global configuration command to switch to the dial peer configuration mode
from the global configuration mode. Use the exit command to exit the dial peer configuration mode and
return to the global configuration mode.
Example
The following example accesses the dial peer configuration mode and configures a POTS dial peer
identified as dial peer 10:
configure terminal
dial-peer voice 10 pots
Related Commands
voice-port
dial-type
To specify the type of out-dialing for voice-port interfaces, use the dial-type voice-port configuration
command. Use the no form of this command to disable this feature.
dial-type {dtmf | pulse}
no dial-type
number Digit(s) defining a particular dial peer. Valid entries are from 1 to
2147483647.
voip VoIP dial peer using voice encapsulation on the POTS network.
pots POTS dial peer using VoIP encapsulation on the IP backbone.