Specifications

vi
Cisco 1751 Router Software Configuration Guide
OL-1070-01
VLAN Commands
This section provides an alphabetical listing of all the VLAN commands that are new or specific to the
Cisco 1751 router. All other commands used with this feature are documented in the Cisco IOS Release
12.1T command reference documents.
clear vlan statistics
To remove virtual LAN statistics from any statically or system configured entries, use the clear vlan
statistics privileged EXEC command.
clear vlan statistics
Syntax Description
This command has no arguments or keywords.
Default
No default behavior or values.
Command Mode
Privileged EXEC
Example
The following example clears VLAN statistics:
clear vlan statistics
debug vlan packet
Use the debug vlan packet privileged EXEC command to display general information on virtual LAN
(VLAN) packets that the router received but is not configured to support. The no form of this command
disables debugging output.
debug vlan packet
no debug vlan packet
Syntax Description
This command has no arguments or keywords.
Usage Guidelines
The debug vlan packet command displays only packets with a VLAN identifier that the router is not
configured to support. This command allows you to identify other VLAN traffic on the network. Virtual
LAN packets that the router is configured to route or switch are counted and indicated when you use
the show vlans command.