Specifications

xvi
Cisco 1751 Router Software Configuration Guide
OL-1070-01
21:59:38: vtsp:[0/1:5505, S_CONNECT, E_DSP_DTMF_DIGIT_BEGIN]
21:59:38: act_report_digit_begin
21:59:38: vtsp:[0/1:5505, S_CONNECT, E_DSP_DTMF_DIGIT]
21:59:38: act_report_digit_end
21:59:38: vtsp_timer_stop: 7917856
21:59:38: vtsp_timer: 7917856
21:59:39: vtsp:[0/1:5505, S_CONNECT, E_TSP_DISCONNECT_IND]
21:59:39: act_generate_disc
21:59:39: vtsp_ring_noan_timer_stop: 7917977
21:59:39: vtsp_timer_stop: 7917977
21:59:39: vtsp_pcm_tone_detect_timer_stop: 7917977
21:59:39: vtsp:[0/1:5505, S_CONNECT, E_CC_BRIDGE_DROP]
21:59:39: act_bdrop
21:59:39: vtsp:[0/1:5505, S_CONNECT, E_CC_DISCONNECT]
21:59:39: act_disconnect
21:59:39: vtsp_ring_noan_timer_stop: 7917977
21:59:39: vtsp_pcm_tone_detect_timer_stop: 7917977
21:59:39: vtsp_pcm_switchover_timer_stop: 7917977
21:59:39: vtsp_timer_stop: 7917977
21:59:39: vtsp_timer: 7917977
21:59:39: vtsp:[0/1:5505, S_WAIT_STATS, E_DSP_GET_ERROR]
21:59:39: act_get_error
21:59:39: vtsp_print_error_stats: rx_dropped=0 tx_dropped=0 rx_control=40
tx_control=20 tx_control_dropped=0 dsp_mode_channel_1=0 dsp_mode_channel_2=0
c[0]=76 c[1]=68 c[2]=68 c[3]=78 c[4]=106 c[5]=92 c[6]=73 c[7]=71 c[8]=71 c[9]=71
c[10]=71 c[11]=71 c[12]=71 c[13]=68 c[14]=73 c[15]=6
21:59:39: vtsp_timer_stop: 7917978
21:59:39: vtsp_timer: 7917978
21:59:39: vtsp:[0/1:5505, S_WAIT_STATS, E_DSP_GET_LEVELS]
21:59:39: act_get_levels
21:59:39: vtsp:[0/1:5505, S_WAIT_STATS, E_DSP_GET_TX]
21:59:39: act_stats_complete
21:59:39: vtsp_timer_stop: 7917978
21:59:39: vtsp_ring_noan_timer_stop: 7917978
21:59:39: vtsp_timer: 7917978
21:59:39: vtsp:[0/1:5505, S_WAIT_RELEASE, E_TSP_DISCONNECT_CONF]
21:59:39: act_wrelease_release
21:59:39: vtsp_timer_stop: 7917978vtsp_do_call_historyvtsp_do_call_history
CoderRate 5
21:59:39: vtsp:[0/1:5505, S_CLOSE_DSPRM, E_DSPRM_CLOSE_COMPLETE]
21:59:39: act_terminate
debug vtsp session
Use the debug vtsp session EXEC command to trace how the router interacts with the digital signal
processor (DSP) based on the signaling indications from the signaling stack and requests from the
application. Use the no form of this command to disable debugging output.
[no] debug vtsp session
Usage Guidelines
The debug vtsp session command displays information about how each network indication and
application request is processed, signaling indications, and DSP control messages.
This debug level shows the internal workings of the voice telephony call state machine.