Specifications

ix
Cisco 1751 Router Software Configuration Guide
OL-1070-01
The following output shows that the higher layer code accepts the call, requests addressing information,
and starts DTMF and dial-pulse collection. This also shows that the digit timer is started.
vcsm_process_event: [1/0, 0.6, 11] act_setup_ind_ack
dsp_voice_mode: [1/0 packet_len=22 channel_id=1 packet_id=73 coding_type=1
voice_field_size=160 VAD_flag=0 echo_length=128 comfort_noise=1 fax_detect=1
dsp_dtmf_mode: [1/0] packet_len=12 channel_id=1 packet_id=65 dtmf_or_mf=0
dsp_CP_tone_on: [1/0] packet_len=32 channel_id=1 packet_id=72 tone_id=3 n_freq=2
freq_of_first=350 freq_of_second=440 amp_of_first=4000 amp_of_second=4000 direction=1
on_time_first=65535 off_time_first=0 on_time_second=65535 off_time_second=0
dsp_digit_collect_on: [1/0] packet_len=22 channel_id=129 packet_id=35 min_inter_delay=550
max_inter_delay=3200 mim_make_time=18 max_make_time=75 min_brake_time=18
max_brake_time=75
vcsm_timer: 46653
The following output shows the collection of digits one by one until the higher level code indicates it
has enough. The input timer is restarted with each digit, and the device waits in idle mode for
connection to proceed.
vcsm_process_event: [1/0, 0.7, 25] act_dcollect_digit
dsp_CP_tone_off: [1/0] packet_len=10 channel_id=1 packet_id=71
vcsm_timer: 47055
vcsm_process_event: [1/0, 0.7, 25] act_dcollect_digit
dsp_CP_tone_off: [1/0] packet_len=10 channel_id=1 packet_id=71
vcsm_timer: 47079
vcsm_process_event: [1/0, 0.7, 25] act_dcollect_digit
dsp_CP_tone_off: [1/0] packet_len=10 channel_id=1 packet_id=71
vcsm_timer: 47173
vcsm_process_event: [1/0, 0.7, 25] act_dcollect_digit
dsp_CP_tone_off: [1/0] packet_len=10 channel_id=1 packet_id=71
vcsm_timer: 47197
vcsm_process_event: [1/0, 0.7, 25] act_dcollect_digit
dsp_CP_tone_off: [1/0] packet_len=10 channel_id=1 packet_id=71
vcsm_timer: 47217
vcsm_process_event: [1/0, 0.7, 13] act_dcollect_proc
dsp_CP_tone_off: [1/0] packet_len=10 channel_id=1 packet_id=71
dsp_digit_collect_off: [1/0] packet_len=10 channel_id=129 packet_id=36
dsp_idle_mode: [1/0] packet_len=10 channel_id=1 packet_id=68
The following output shows that the network voice path cuts through:
vcsm_process_event: [1/0, 0.8, 15] act_bridge
vcsm_process_event: [1/0, 0.8, 20] act_caps_ind
vcsm_process_event: [1/0, 0.8, 21] act_caps_ack
dsp_voice_mode: [1/0] packet_len=22 channel_id=1 packet_id=73 coding_type=6
voice_field_size=20 VAD_flag=1 echo_length=128 comfort_noise=1 fax_detect=1
The following output shows that the called-party end of the connection is connected:
vcsm_process_event: [1/0, 0.8, 8] act_connect