Specifications

lxviii
Cisco 1751 Router Software Configuration Guide
OL-1070-01
Syntax Description
Default
No voice-port mode is configured.
Command Mode
Global configuration.
Usage Guidelines
Use the voice-port global configuration command to switch to the voice port configuration mode from
the global configuration mode. Use the exit command to exit the voice port configuration mode and
return to the global configuration mode.
Example
The following example accesses the voice port configuration mode for a VIC installed in port 0, slot 0:
configure terminal
voice port 0/0
Related Commands
dial-peer
slot-number Slot number in the router where the VIC is installed. Valid entries are
from 0 to 2, depending on the slot where it has been installed.
port Voice port. Valid entries are 0 or 1.