Specifications

lxv
Cisco 1751 Router Software Configuration Guide
OL-1070-01
Example
The following example configures the clear-wait duration to 300 milliseconds:
voice port 0/0
timing clear-wait 300
Related Commands
timeouts initial
timeouts interdigit
type
To specify the E&M interface type, use the type voice-port configuration command. Use the no form
of this command to reset the default value for this command.
type {1 | 2 | 3 | 5}
no type
dial-pulse min-delay
milliseconds
In
digit milliseconds Out
inter-digit milliseconds Out
pulse pulses per second Out
pulse-inter-digit milliseconds Out
wink-duration milliseconds Out
wink-wait milliseconds Out
Table 11 Timing Keywords/Arguments Call Signal Directions
Timing Keyword/Argument Call Signal Direction