Specifications

lviii
Cisco 1751 Router Software Configuration Guide
OL-1070-01
Example
The following example configures ground-start signaling, which means that both sides of a connection
can place a call and hang up, as the signaling type for a voice port:
configure terminal
voice port 1/1
signal ground-start
snmp enable peer-trap poor-qov
To generate poor-quality-of-voice notification for applicable calls associated with VoIP dial peers, use
the snmp enable peer-trap poor-qov dial-peer configuration command. Use the no form of this
command to disable this feature.
snmp enable peer-trap poor-qov
no snmp enable peer-trap poor-qov
Syntax Description
This command has no arguments or keywords.
Default
Disabled.
Command Mode
Dial-peer configuration.
Usage Guidelines
Use the snmp enable peer-trap poor qov command to generate poor-quality-of-voice notifications for
applicable calls associated with this dial peer. If you have an SNMP manager that uses SNMP messages
when voice quality drops, you might want to enable this command. Otherwise, you should disable this
command to reduce unnecessary network traffic.
This command only applies to VoIP peers.
Example
The following example enables poor-quality-of-voice notifications for calls associated with VoIP dial
peer 10:
dial-peer voice 10 voip
snmp enable peer-trap poor-qov
Related Commands
snmp-server enable traps voice poor-qov
snmp trap link-status