Specifications
lv
Cisco 1751 Router Software Configuration Guide
OL-1070-01
Related Commands
show call active voice
show call history voice
show dial-peer voice
show num-exp
shutdown (dial-peer configuration)
To change the administrative state of the selected dial peer from up to down, use the shutdown dial-peer
configuration command. Use the no form of this command to change the administrative state of this dial
peer from down to up.
shutdown
no shutdown
Syntax Description
This command has no arguments or keywords.
Default
No state is predefined.
Command Mode
Dial-peer configuration.
Usage Guidelines
When a dial peer is shut down, you cannot initiate calls to that peer. This command applies to both VoIP
and POTS peers.
Example
The following example changes the administrative state of voice telephony dial peer 10 to down:
configure terminal
dial-peer voice 10 pots
shutdown
Wink Duration Timing Maximum wink duration for wink start signaling.
Wink Wait Duration Timing Maximum wink wait duration for wink start signaling.
Table 8 Show-Voice-Port Command Field Descriptions (Continued)
Field Description