Specifications

xlvii
Cisco 1751 Router Software Configuration Guide
OL-1070-01
Related Commands
show call active voice
show call-history voice
show num-exp
show voice port
show dialplan incall number
To pair different voice ports and telephone numbers together for troubleshooting, use the show dialplan
incall number privileged EXEC command.
show dialplan incall slot-number/port number dial string
Syntax Description
Command Mode
Privileged EXEC.
Usage Guidelines
Occasionally, an incoming call cannot be matched to a dial peer in the dial-peer database. One reason
this might occur is that the specified destination cannot be reached via the voice interface through which
the incoming call came. Use the show dialplan incall number command as a troubleshooting method
to resolve the call destination by pairing voice ports and telephone numbers together until there is a
match.
req-qos Configured requested QoS for calls for this dial peer.
session target Session target of this peer.
sess-proto Session protocol to be used for Internet calls between local and remote
router via the IP backbone.
Successful Calls Number of completed calls to this peer.
tag Unique dial-peer ID number.
VAD Whether or not VAD is enabled for this dial peer.
Table 5 Show-Dial-Peer-Voice Command Field Descriptions (Continued)
Field Description
slot-number Slot number in the router where the VIC is installed. Valid entries are
from 0 to 2, depending on the VIC you have installed.
port Voice port. Valid entries are 0 or 1.
dial string Particular destination pattern (telephone number).