Specifications

xl
Cisco 1751 Router Software Configuration Guide
OL-1070-01
Related Commands
show call active voice
show dial-peer voice
show num-exp
show voice port
show controllers voice
To display information about voice related hardware, use the show controllers voice privileged EXEC
command.
show controllers voice
Syntax Description
This command contains no arguments or keywords.
Command Mode
Privileged EXEC.
Usage Guidelines
This command displays interface status information that is specific to voice related hardware, such as,
the registers of the TDM switch, the host port interface of the DSP, and the DSP firmware versions.
The information displayed is generally useful for diagnostic tasks performed by technical support
people only.
TransmitBytes Number of bytes transmitted by this peer during the call.
TransmitPackets Number of packets transmitted by this peer during the call.
TxDuration Duration of the transmit path open from this peer to the voice gateway
for the call.
VADEnable Whether or not VAD was enabled for this call.
VoiceTxDuration Duration of voice transmitted from this peer to voice gateway for this
call. You can derive the Voice Utilization Rate by dividing the
VoiceTxDuration by the TxDuration value.
Table 4 Show-Call-History-Voice Command Field Descriptions (Continued)
Field Description