Datasheet
Lab – Configuring Frame Relay and Subinterfaces
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 18 of 38
DLCI = 301, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0/0/1
input pkts 1406 output pkts 1176 in bytes 105143
out bytes 93110 dropped pkts 0 in pkts dropped 0
out pkts dropped 0 out bytes dropped 0
in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
out BECN pkts 0 in DE pkts 0 out DE pkts 0
out bcast pkts 1038 out bcast bytes 80878
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
pvc create time 07:51:07, last time pvc status changed 00:37:16
DLCI = 311, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0/0/1.311
input pkts 513 output pkts 114 in bytes 47072
out bytes 30360 dropped pkts 0 in pkts dropped 0
out pkts dropped 0 out bytes dropped 0
in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
out BECN pkts 0 in DE pkts 0 out DE pkts 0
out bcast pkts 74 out bcast bytes 26200
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
pvc create time 01:11:06, last time pvc status changed 00:37:16
e. Issue the show frame-relay route command on FR to verify the status of the Frame Relay map
statements.
FR# show frame-relay route
Input Intf Input Dlci Output Intf Output Dlci Status
Serial0/0/0 103 Serial0/0/1 301 active
Serial0/0/0 113 Serial0/0/1 311 active
Serial0/0/1 301 Serial0/0/0 103 active
Serial0/0/1 311 Serial0/0/0 113 active
f. Issue the show frame-relay map command on R1 and R3 to verify the status of the Frame Relay map
statements.
R1# show frame-relay map
Serial0/0/0 (up): ip 10.1.1.2 dlci 103(0x67,0x1870), static,
broadcast,
CISCO, status defined, active
Serial0/0/0 (up): ipv6 FE80::3 dlci 103(0x67,0x1870), static,
broadcast,
CISCO, status defined, active
Serial0/0/0 (up): ipv6 2001:DB8:ACAD:B::1 dlci 103(0x67,0x1870), static,
CISCO, status defined, active
Serial0/0/0 (up): ip 10.1.1.1 dlci 103(0x67,0x1870), static,
CISCO, status defined, active
Serial0/0/0 (up): ipv6 2001:DB8:ACAD:B::3 dlci 103(0x67,0x1870), static,
CISCO, status defined, active
Serial0/0/0.113 (up): point-to-point dlci, dlci 113(0x71,0x1C10), broadcast