Datasheet

Lab – Troubleshooting Basic PPP with Authentication
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 16 of 23
192.168.13.0 0.0.0.3 area 0
Passive Interface(s):
GigabitEthernet0/1
Routing Information Sources:
Gateway Distance Last Update
3.3.3.3 110 00:01:46
2.2.2.2 110 00:01:46
Distance: (default is 110)
R2# show ip protocols
*** IP Routing is NSF aware ***
Routing Protocol is "ospf 1"
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Router ID 2.2.2.2
Number of areas in this router is 1. 1 normal 0 stub 0 nssa
Maximum path: 4
Routing for Networks:
192.168.12.0 0.0.0.3 area 0
192.168.23.0 0.0.0.3 area 0
209.165.200.224 0.0.0.3 area 0
Routing Information Sources:
Gateway Distance Last Update
3.3.3.3 110 00:03:53
1.1.1.1 110 00:07:45
Distance: (default is 110)
R3# show ip protocols
*** IP Routing is NSF aware ***
Routing Protocol is "ospf 1"
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Router ID 3.3.3.3
Number of areas in this router is 1. 1 normal 0 stub 0 nssa
Maximum path: 4
Routing for Networks:
192.168.13.0 0.0.0.3 area 0
192.168.23.0 0.0.0.3 area 0
Passive Interface(s):
GigabitEthernet0/1
Routing Information Sources:
Gateway Distance Last Update
1.1.1.1 110 00:07:14
2.2.2.2 110 00:07:14
Distance: (default is 110)
Resolve all problems found. Record the commands used to correct the configuration.