Datasheet
Lab – Troubleshooting Basic PPP with Authentication
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 2 of 23
Addressing Table
Device
Interface
IP Address
Subnet Mask
Default Gateway
R1
G0/1
192.168.1.1
255.255.255.0
N/A
S0/0/0 (DCE)
192.168.12.1
255.255.255.252
N/A
S0/0/1
192.168.13.1
255.255.255.252
N/A
R2
Lo0
209.165.200.225
255.255.255.252
N/A
S0/0/0
192.168.12.2
255.255.255.252
N/A
S0/0/1 (DCE)
192.168.23.1
255.255.255.252
N/A
R3
G0/1
192.168.3.1
255.255.255.0
N/A
S0/0/0 (DCE)
192.168.13.2
255.255.255.252
N/A
S0/0/1
192.168.23.2
255.255.255.252
N/A
PC-A
NIC
192.168.1.3
255.255.255.0
192.168.1.1
PC-C
NIC
192.168.3.3
255.255.255.0
192.168.3.1
Objectives
Part 1: Build the Network and Load Device Configurations
Part 2: Troubleshoot the Data Link Layer
Part 3: Troubleshoot the Network Layer
Background / Scenario
The routers at your company were configured by an inexperienced network engineer. Several errors in the
configuration have resulted in connectivity issues. Your manager has asked you to troubleshoot and correct
the configuration errors and document your work. Using your knowledge of PPP and standard testing
methods, find and correct the errors. Ensure that all of the serial links use PPP CHAP authentication, and that
all of the networks are reachable.
Note: The routers used with CCNA hands-on labs are Cisco 1941 Integrated Services Routers (ISRs) with
Cisco IOS Release 15.2(4)M3 (universalk9 image). The switches used are Cisco Catalyst 2960s with Cisco
IOS Release 15.0(2) (lanbasek9 image). Other routers, switches, and Cisco IOS versions can be used.
Depending on the model and Cisco IOS version, the commands available and output produced might vary
from what is shown in the labs. Refer to the Router Interface Summary Table at the end of this lab for the
correct interface identifiers.
Note: Make sure that the routers and switches have been erased and have no startup configurations. If you
are unsure, contact your instructor.
Instructor Note: Refer to the Instructor Lab Manual for the procedures to initialize and reload devices.
Required Resources
3 Routers (Cisco 1941 with Cisco IOS Release 15.2(4)M3 universal image or comparable)
2 Switches (Cisco 2960 with Cisco IOS Release 15.0(2) lanbasek9 image or comparable)
2 PCs (Windows 7, Vista, or XP with a terminal emulation program, such as Tera Term)
Console cables to configure the Cisco IOS devices via the console ports