Datasheet

Lab – Configuring Basic PPP with Authentication
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 24 of 27
interface Loopback0
ip address 209.165.200.225 255.255.255.224
!
interface Embedded-Service-Engine0/0
no ip address
shutdown
!
interface GigabitEthernet0/0
no ip address
shutdown
duplex auto
speed auto
!
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/0/0
ip address 10.1.1.2 255.255.255.252
encapsulation ppp
ppp authentication chap
!
interface Serial0/0/1
ip address 10.2.2.2 255.255.255.252
encapsulation ppp
ppp authentication chap
clock rate 128000
!
router ospf 1
network 10.1.1.0 0.0.0.3 area 0
network 10.2.2.0 0.0.0.3 area 0
default-information originate
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
ip route 0.0.0.0 0.0.0.0 Loopback0
!
!
!
!
control-plane
!
!
banner motd ^C