Datasheet

Lab – Configuring SNMP
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 3 of 20
e. Assign class as the encrypted privileged EXEC mode password.
f. Configure logging synchronous to prevent console messages from interrupting command entry.
g. Verify successful connectivity between the LAN devices by issuing the ping command.
h. Copy the running configuration to the startup configuration.
Part 2: Configure SNMP Manager and Agents
In Part 2, SNMP management software will be installed and configured on PC-A, and R1 and S1 will be
configured as SNMP agents.
Step 1: Install an SNMP management program.
a. Download and install the PowerSNMP Free Manager by Dart Communications from the following URL:
http://www.dart.com/snmp-free-manager.aspx.
b. Launch the PowerSNMP Free Manager program.
c. Click No if prompted to discover available SNMP agents. You will discover SNMP agents after configuring
SNMP on R1. PowerSNMP Free Manager supports SNMP version 1, 2, and 3. This lab uses SNMPv2.
d. In the pop-up Configuration window (if no pop-up window appear, go to Tools > Configuration), set the
local IP address to listen on 192.168.1.3 and click OK.