Datasheet

Lab – Configuring a Router as a PPPoE Client for DSL Connectivity
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 7 of 10
shutdown
!
interface GigabitEthernet0/0
no ip address
shutdown
duplex auto
speed auto
!
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
pppoe enable group global
pppoe-client dial-pool-number 1
!
interface Serial0/0/0
no ip address
shutdown
clock rate 2000000
!
interface Serial0/0/1
no ip address
shutdown
!
interface Dialer1
mtu 1492
ip address negotiated
encapsulation ppp
dialer pool 1
ppp authentication chap callin
ppp chap hostname Cust1
ppp chap password 0 ciscopppoe
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
ip route 0.0.0.0 0.0.0.0 Dialer1
!
control-plane
!
banner motd ^C
Unauthorized Access Prohibited.
^C
!
line con 0
password 7 14141B180F0B
logging synchronous