Datasheet

WAN Device Modules
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 2 of 5
 T1 and E1Trunk Voice and WAN
 Wireless LANs and WANs
Step 3: In the matrix, record the interface module type you need to purchase for your ISRs for
upgrade purposes.
Step 4: Use the Internet to research pictures of the modules. Provide a screenshot of the
module or a hyperlink to a picture of each module.
Step 5: Share your matrix with a classmate, group, class, or your instructor.
Suggested Activity Example Solution:
Instructor Notes:
 This is a good place to have students discuss the terminology. For instance, WIC2T = WAN Interface Card
with 2 serial ports.
 Students can also add various cards to routers in PT and use commands such as show ip interface brief to
view the changes.
 Please encourage students to read the datasheet information listed on the modular card graphics sites – they
will become familiar with different interface types by doing so.
 All graphics will vary as shown in the students’ final matrix – the graphics shown in this Activity Example
Solution are representative in nature and were copied from the Cisco products sites. Each graphic is
hyperlinked to the source available at the time this activity was created.