Datasheet

Lab – Configuring Port Address Translation (PAT)
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 10 of 12
interface Serial0/0/1
ip address 209.165.201.18 255.255.255.252
ip nat outside
ip virtual-reassembly in
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
ip nat inside source list 1 interface Serial0/0/1 overload
ip route 0.0.0.0 0.0.0.0 209.165.201.17
!
access-list 1 permit 192.168.1.0 0.0.0.255
!
!
!
Control-plane
!
!
!
line con 0
password cisco
logging synchronous
login
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
password cisco
login
transport input all
!
scheduler allocate 20000 1000
!
end
Router ISP
ISP# show run
Building configuration...
Current configuration : 1487 bytes
!
version 15.2