Datasheet

Lab – Troubleshooting Basic Frame Relay
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 10 of 16
out bcast pkts 0 out bcast bytes 0
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
pvc create time 04:16:10, last time pvc status changed 01:03:33
DLCI = 202, DLCI USAGE = LOCAL, PVC STATUS = DELETED, INTERFACE = Serial0/0/1
input pkts 0 output pkts 0 in bytes 0
out bytes 0 dropped pkts 0 in pkts dropped 0
out pkts dropped 0 out bytes dropped 0
in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
out BECN pkts 0 in DE pkts 0 out DE pkts 0
out bcast pkts 0 out bcast bytes 0
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
pvc create time 04:16:10, last time pvc status changed 01:06:12
b. Issue the show frame-relay map command on R1 and R3.
R1:
R1# show frame-relay map
Serial0/0/0 (up): ip 10.1.1.2 dlci 101(0x65,0x1850), static,
CISCO, status defined, active
R3:
R3# show frame-relay map
Serial0/0/1 (up): ip 10.1.1.2 dlci 201(0xC9,0x3090), static,
CISCO, status defined, active
Serial0/0/1 (up): ip 10.1.1.1 dlci 202(0xCA,0x30A0), static,
broadcast,
CISCO, status deleted
c. Issue the show frame-relay lmi command on R1 and R3.
R1:
R1# show frame-relay lmi
LMI Statistics for interface Serial0/0/0 (Frame Relay DTE) LMI TYPE = CISCO
Invalid Unnumbered info 0 Invalid Prot Disc 0
Invalid dummy Call Ref 0 Invalid Msg Type 0
Invalid Status Message 0 Invalid Lock Shift 0
Invalid Information ID 0 Invalid Report IE Len 0
Invalid Report Request 0 Invalid Keep IE Len 0
Num Status Enq. Sent 6220 Num Status msgs Rcvd 6221
Num Update Status Rcvd 0 Num Status Timeouts 0
Last Full Status Req 00:00:40 Last Full Status Rcvd 00:00:40
R3:
R3# show frame-relay lmi
LMI Statistics for interface Serial0/0/1 (Frame Relay DTE) LMI TYPE = CISCO
Invalid Unnumbered info 0 Invalid Prot Disc 0
Invalid dummy Call Ref 0 Invalid Msg Type 0