Datasheet

Lab – Troubleshooting Basic Frame Relay
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 5 of 16
Serial0/0/1 10.1.1.2 YES manual up up
b. Issue the show run | section interface command to view all the commands related to interfaces.
R1:
R1# show run | section interface
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
ip address 192.168.1.1 255.255.255.0
shutdown
duplex auto
speed auto
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
interface Serial0/0/0
ip address 10.1.1.5 255.255.255.252
encapsulation frame-relay
clock rate 128000
frame-relay map ip 10.1.1.2 101
no frame-relay inverse-arp
interface Serial0/0/1
no ip address
shutdown
R3:
R3# show run | section interface
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
ip address 192.168.30.1 255.255.255.0
duplex auto
speed auto
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
interface Serial0/0/0
no ip address
shutdown
clock rate 2000000