Datasheet

Lab – Configuring Frame Relay and Subinterfaces
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 29 of 38
interface Serial0/0/0
no ip address
encapsulation frame-relay
frame-relay intf-type dce
frame-relay route 103 interface Serial0/0/1 301
!
interface Serial0/0/1
no ip address
encapsulation frame-relay
clock rate 128000
frame-relay intf-type dce
frame-relay route 301 interface Serial0/0/0 103
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
control-plane
!
banner motd ^C Unauthorized Access is Prohibited! ^C
!
line con 0
password 7 094F471A1A0A
logging synchronous
login
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
password 7 01100F175804
login
transport input all
!
scheduler allocate 20000 1000
!
end
Router R3 (After Part 3 of this lab)
R3# show run
Building configuration...
Current configuration : 2123 bytes
!