Specifications

5-41
Cisco 1700 Series Router Software Configuration Guide
78-5407-03
Chapter 5 Configuring ISDN
Dial-In ISDN BRI Pool
Configuring Security
Follow these steps to configure security measures.
Step3
service timestamps log datetime msec Configure the router to show the date and time
of all log messages.
This command is optional, but it is
recommended if you use the verification steps
described in this guide. This feature is
enabled for all the command output examples
shown in this guide.
Step4
isdn switch-type basic-ni Configure the type of central office switch
being used on the ISDN interface. Use the
keyword that matches the ISDN switch type
that you are using:
• basic-1tr6—German 1TR6 ISDN
switches
• basic-5ess—Basic rate 5ESS switches
• basic-dms100—NT DMS-100 basic rate
switches
• basic-net3—NET3 ISDN switches
• basic-ni—National ISDN-1 switches
• basic-nwnet3—Norway NET3 switches
(phase 1)
• basic-nznet3—New Zealand NET3
switches
• basic-ts013—Australian TS013 switches
• ntt—Japanese NTT ISDN switches
• vn2—French VN2 ISDN switches
• vn3—French VN3 ISDN switches
Command Task