Specifications

5-25
Cisco 1700 Series Router Software Configuration Guide
78-5407-03
Chapter 5 Configuring ISDN
Dial-Up ISDN Connection with Dialer Profiles
Encapsulation PPP, loopback not set, keepalive set (10 sec)
LCP Open, multilink Open
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Queueing strategy: fifo...
Step 6 To continue configuration, reenter global configuration mode.
Configuring When the Router Dials Out
Follow these steps to configure parameters that control how and when the router
dials the central-site router.
Command Task
Step1
ip route 192.168.37.0 255.255.255.0
192.168.37.40
Establish a static IP route to the remote
network.
Step2
ip route 192.168.37.40 255.255.255.255
BRI0
Establish a static IP route to the remote
network through the router BRI.
Step3
access-list 101 permit icmp any any Define a standard access list based on your
network.
Step4
access-list 101 deny ip any any Define a standard access list based on your
network.
Step5
access-list 900 deny any any all any 457 Define a standard access list based on your
network.
Step6
access-list 900 deny rip any rip any rip Define a standard access list based on your
network.
Step7
access-list 900 deny sap any sap any sap Define a standard access list based on your
network.
Step8
access-list 900 permit any any all any all Define a standard access list based on your
network.