Specifications

5-3
Cisco 1700 Series Router Software Configuration Guide
78-5407-03
Chapter 5 Configuring ISDN
Dial-Up ISDN Connection to a Central-Site Router
Figure 5-1 shows the configuration example used in this section.
Figure 5-1 ISDN Configuration Example—Dial-Up ISDN Connection to Central
Site Router
Configuring Global Parameters
Follow these steps to configure the router for global parameters.
ISDN
14316
ISDN interface addresses
Remote site Central site
IP: 172.16.25.42
IP: 192.168.37.40
Hostname: 1700
IP network: 172.16.25.0/27 IP network: 192.168.37.0/24
Username: HQ
Phone: [phone]
PPP password: guessme
1700
Router
Command Task
Step1
configure terminal Enter configuration mode.
Step2
service timestamps debug datetime msec Configure the router to show the date and time
of all debug messages.
This command is optional, but it is
recommended if you use debug commands to
troubleshoot your configuration.
Step3
service timestamps log datetime msec Configure the router to show the date and time
of all log messages.
This command is optional, but it is
recommended if you use the verification steps
described in this guide. This feature is
enabled for all the command output examples
shown in this guide.