Specifications

Chapter 9 Configuring X.25
X.25 over ISDN D Channel
9-22
Cisco 1700 Series Router Software Configuration Guide
78-5407-03
Verifying Your Configuration
You can verify your configuration to this point by confirming the ISDN line
status, as follows:
Step2
ipx routing 0060.834f.66dd Enable IPX routing, and configure the
router with an IPX address.
If you do not know your router IPX address,
you can enter this command without an
address. The router then determines its own
IPX address. You can then enter a
write terminal command. The address will
be displayed in the command output.
Step3
isdn switch-type basic-5ess Configure the type of central office switch
being used on the ISDN interface. Use the
keyword that matches the ISDN switch type
that you are using:
• basic-1tr6—German 1TR6 ISDN
switches
• basic-5ess—Basic rate 5ESS switches
• basic-dms100—NT DMS-100 basic
rate switches
• basic-net3—NET3 ISDN switches
• basic-ni—National ISDN-1 switches
• basic-nwnet3—Norway NET3
switches (phase 1)
• basic-nznet3—New Zealand NET3
switches
• basic-ts013—Australian TS013
switches
• ntt—Japanese NTT ISDN switches
• vn2—French VN2 ISDN switches
• vn3—French VN3 ISDN switches
Command Task