Specifications

9-3
Cisco 1700 Series Router Software Configuration Guide
78-5407-03
Chapter 9 Configuring X.25
X.25
Configuring Global Parameters
Follow these steps to configure the router for global parameters.
Configuring Security
Follow these steps to configure the router with security measures.
Command Task
Step1
configure terminal Enter configuration mode.
Step2
service timestamps debug datetime msec Configure the router to show the date and
time of all debug messages.
This command is optional, but it is
recommended if you use debug commands
to troubleshoot your configuration.
Step3
service timestamps log datetime msec Configure the router to show the date and
time of all log messages.
This command is optional, but it is
recommended if you use the verification
steps described in this guide. This feature is
enabled for all the command output
examples shown in this guide.
Step4
ipx routing 0060.834f.66dd Enable IPX routing, and configure the router
with an IPX address.