Specifications

Chapter 8 Configuring Asynchronous Connections
Asynchronous Dial-In Pool
8-12
Cisco 1700 Series Router Software Configuration Guide
78-5407-03
Asynchronous Dial-In Pool
This section describes how to configure a Cisco router with multiple
asynchronous interfaces for dial-in connections. In this example, the Cisco router
functions as the central-site router that accepts connections from remote users.
These are the major task in configuring an asynchronous dial-in pool:
• Configuring Global Parameters
• Configuring Security
• Configuring the Fast Ethernet Interface
• Configuring the Asynchronous Interfaces
• Configuring Command-Line Access to the Router
Figure 8-2 shows the configuration example used in this section.
Figure 8-2 Configuration Example—Asynchronous Dial-In Pool
Cisco 1700
Central site
Remote
users
Asynchronous
lines
Dial-in pool
address range:
192.168.39.239 to 192.168.39.254
username:
jason
username:
laura
username:
russ
username:
tito
IP network
171.68.39.0
14485