Specifications

Chapter 8 Configuring Asynchronous Connections
Asynchronous Dial-Up Connection
8-4
Cisco 1700 Series Router Software Configuration Guide
78-5407-03
Configuring Security
Follow these steps to configure the router with security measures.
Step4
ipx routing 0060.834f.66dd Enable Internetwork Packet Exchange (IPX)
routing and configure the router with an IPX
address.
Step5
chat-script dialout “atdt\t” timeout 60
connect\c
Create a script that causes the modem
connected to the router to place a call to the
central site.
Command Task
Command Task
Step1
enable password <user> Specify a password to prevent unauthorized
access to the router.
Step2
hostname Router Configure the router with a host name,
which is used in prompts and default
configuration file names.
For PPP authentication, the host name
entered with this command must match the
username of the central-site router.
Step3
username HQ password <guessme> Specify the password used during caller
identification and Challenge Handshake
Authorization Protocol (CHAP) and
Password Authorization Protocol (PAP)
authentication.
For CHAP and PAP authentication, the
username entered with this command must
match the host name of the central-site
router.