Specifications

8-3
Cisco 1700 Series Router Software Configuration Guide
78-5407-03
Chapter 8 Configuring Asynchronous Connections
Asynchronous Dial-Up Connection
Figure 8-1 Configuration Example—Asynchronous Dial-Up Connection
Configuring Global Parameters
Follow these steps to configure global parameters.
Public telephone
network
14319
Remote site
Modem Modem
Central site
Asynchronous interface
IP address: 192.168.39.41
Asynchronous interface
IP address: 192.168.39.40
IPX address: 9876.0000.0c06.e006
Username: HQ
Phone: [phone]
PPP password:
guessme
1700
Router
IPX network: 9876IPX network: ABC
Command Task
Step1
configure terminal Enter configuration mode.
Step2
service timestamps debug datetime msec Configure the router to show the date and
time of all debug messages.
This command is optional, but it is
recommended if you use debug commands
to troubleshoot your configuration.
Step3
service timestamps log datetime msec Configure the router to show the date and
time of all log messages.
This command is optional, but it is
recommended if you use the verification
steps described in this guide. This feature is
enabled for all the command output
examples shown in this guide.