Specifications

Chapter 7 Configuring Frame Relay
ISDN as a Backup Connection with Dialer Profiles
7-32
Cisco 1700 Series Router Software Configuration Guide
78-5407-03
Configuring Security
Follow these steps to configure the router with security measures.
Command Task
Step1
hostname Router Configure the router with a host name, which
is used in prompts and default configuration
filenames.
For PPP authentication, the host name entered
with this command must match the username
of the central-site router.
Step2
enable password <user> Specify a password to prevent unauthorized
access to the router.
Step3
username HQ1 password <guessme1> Specify the password used during caller
identification and CHAP and PAP
authentication.
This password applies only to one of the
central-site routers. For security reasons, a
different password should be used for each
remote location that the router dials on the
backup ISDN line.
For PPP authentication, the username entered
with this command must match the host name
of the central-site router.
Step4
username HQ2 password <guessme2> Specify the password used during caller
identification and CHAP and PAP
authentication.
This password applies only to one of the
central-site routers. For security reasons, a
different password should be used for each
remote location that the router dials on the
backup ISDN line.
For PPP authentication, the username entered
with this command must match the host name
of the central-site router.