Specifications

Chapter 7 Configuring Frame Relay
ISDN as a Backup Connection with Dialer Profiles
7-30
Cisco 1700 Series Router Software Configuration Guide
78-5407-03
These are the major tasks in configuring your router:
• Configuring Global Parameters
• Configuring Security
• Configuring the Fast Ethernet Interface
• Configuring the Serial Interface
• Configuring the Primary Connection to the First Central-Site Router
• Configuring the Primary Connection to the Second Central-Site Router
• Configuring the ISDN Interface
• Configuring the Backup Connection to the First Central-Site Router
• Configuring the Backup Connection to the Second Central-Site Router
• Configuring Routing Protocols
• Configuring Command-Line Access to the Router
Configuring Global Parameters
Follow these steps to configure the router for global parameters.
Command Task
Step1
configure terminal Enter configuration mode.
Step2
service timestamps debug datetime msec Configure the router to show the date and time
of all debug messages.
This command is optional, but it is
recommended if you use debug commands to
troubleshoot your configuration.
Step3
service timestamps log datetime msec Configure the router to show the date and time
of all log messages.
This command is optional, but it is
recommended if you use the verification steps
described in this guide. This feature is
enabled for all the command output examples
shown in this guide.