Installation guide

Voice Interface Cards
Cisco WAN Interface Cards Hardware Installation Guide
3-28
Note Ports on the E&M voice interface card are color-coded brown.
Figure 3-26 2-Port E&M Card Front Panel
Connecting the 2-Port E&M Card
Step 1 Confirm that the router is still turned OFF.
Step 2 Connect one end of a straight-through RJ-45-to-RJ-45 cable to the card’s RJ-45
port. (See Figure 3-27.)
Step 3 Connect the other end to the RJ-45 wall outlet.
H10835
SEE MANUAL BEFORE INSTALLATION
VIC
E&M
IN USE IN USE
1 0