Technical data

Step 2—Configuring the LAN Profile
Dial Solutions Quick Configuration Guide
4-6
soho-tahoe> cd hq-sanjose
soho-tahoe:hq-sanjose> show security
Profile Parameters
PPP Security
PPP Authentication OUT NONE<*>
PPP Authentication ACCEPT EITHER
Token Authentication Support
TAS Mode OFF
TAS Client 0.0.0.0
Use Local CHAP Secret ON
Client
User Name soho-tahoe
PAP Password NONE
CHAP Secret EXISTS
Host
PAP Password NONE
CHAP Secret EXISTS
Callback
Request OFF
Reply OFF
Configure
To configure the LAN profile parameters, use the following commands beginning in system
configuration mode:
Verify
To verify the configuration:
• Enter the show configuration command to display the current LAN configuration:
soho-tahoe:LAN> show configuration
Profile Parameters
Bridging Parameters
Bridging OFF<*>
Routed Protocols IP <*>
Learn Mode ON
Passthru OFF
Call Startup Parameters
Line Parameters
Line Speed AUTO
Numbering Plan NORMAL
Call Parameters Link 1 Link 2
Auto ON ON
Called Number
Backup Number
Step Command Purpose
1
soho-tahoe> cd lan
Enter LAN profile mode.
2
soho-tahoe:LAN> set ip address 10.1.3.1
Enter the IP address.
3
soho-tahoe:LAN> set netmask 255.255.255.0
Configure the subnet mask.
4
soho-tahoe:LAN> set bridging off
Turn bridging off.
5
soho-tahoe:LAN> set ip routing on
Turn on IP routing.
6
soho-tahoe:LAN> set ip rip update off
Turn off IP RIP updates.