Technical data

Cisco 766 Configuration 4-3
Verify
Verify
To verify the configuration:
• Enter the show configuration command to display a subset of the current configuration
parameters:
Note This case study configures IP routing on the LAN and access profile. The internal profile
is not used. See the display field “Profile Parameters.”
soho-tahoe> show configuration
System Parameters
Environment
Screen Length 20
Echo Mode ON
CountryGroup 1
Bridging Parameters
LAN Forward Mode ANY
WAN Forward Mode ONLY
Address Age Time OFF
Call Startup Parameters
Multidestination OFF
Line Parameters
Switch Type NI-1
Svc Profile ID 1 53055580840101
Directory Number(s) 5558084
Svc Profile ID 2 53055580850101
Directory Number(s) 5558085
Auto SPID and Switch Detection OFF
Conference access code 60
Transfer access code 61
Call Parameters Link 1 Link 2
Retry Delay 30 30
Button Standard
Profile Parameters
Bridging Parameters
Bridging ON
Routed Protocols NONE
Learn Mode ON
Passthru OFF
Call Startup Parameters
Line Parameters
Line Speed AUTO
Numbering Plan NORMAL
Call Parameters Link 1 Link 2
Auto ON ON
Called Number
Backup Number
Ringback Number
10
soho-tahoe> set password system
Enter new password: admin-pw
Re-Type new password: admin-pw
Protect your Cisco 766 terminal service shell with a
password
1
. The system configuration mode can be
accessed through the console port or a telnet session
2
.
1. Make sure to use your own secret password. Do not use “tahoe-pw” or “admin-pw.”
2. To modify what is protected by the password, use the set local access command.
Step Command Purpose