Technical data

Cisco AS5300 Configuration 2-19
Verify
Verify
Enter the show running command to verify the configuration:
hq-sanjose# show running
Building configuration...
Current configuration:
---- snip ----
!
line 1 96
autoselect during-login
autoselect ppp
modem InOut
---- snip ----
Step 7—Testing Async Shell Connections
Now you are ready to send the first modem call into the Cisco AS5300. This step shows you how to
perform the test and track the async data path taken by a single modem call.
Conduct this test using a shell service, which verifies that the physical async data path is working.
This is the most efficient way to get quick test results in a simple test environment.
At this step, many administrators try to make complex services work such as PPP-based Web
browsing. Do not jump ahead. Many other elements still need to be configured. This step is provided
to ensure that the basic modem link is functioning and that the shell/EXEC prompt can be accessed
from a remote location. To avoid problems, take a layered approach to building a network.
Note To enhance readability of debug output messages, the significant display output fields are
highlighted with bold font.
Figure 2-3 shows the test lab environment used for this test case. The test PC is running a terminal
emulation program, such as Hyper Terminal. This program enables the test PC to make a
modem-to-modem connection with the Cisco AS5300 via the PSTN/ISDN network.