Technical data

Cisco AS5300 Configuration 2-17
Verify
Activated dsl 0
State (0=Idle 1=Propose 2=Busy 3=Reserved 4=Restart 5=Maint)
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 3 3 3 3 3 3 3
Channel (1-31) Service (0=Inservice 1=Maint 2=Outofservice)
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 2 2 2 2 2 2 2
ISDN Se2:23, Channel (1-31)
Activated dsl 0
State (0=Idle 1=Propose 2=Busy 3=Reserved 4=Restart 5=Maint)
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 3 3 3 3 3 3 3
Channel (1-31) Service (0=Inservice 1=Maint 2=Outofservice)
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 2 2 2 2 2 2 2
ISDN Se3:23, Channel (1-31)
Activated dsl 0
State (0=Idle 1=Propose 2=Busy 3=Reserved 4=Restart 5=Maint)
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 3 3 3 3 3 3 3
Channel (1-31) Service (0=Inservice 1=Maint 2=Outofservice)
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 2 2 2 2 2 2 2
Enter the show ip interface brief command to view the individual serial B channel interfaces.
In the following example, Serial 0:0 through Serial 0:22 are B channels and associated to
Serial 0:23.
hq-sanjose# show ip interface brief
Interface IP-Address OK? Method Status Protocol
Ethernet0 unassigned YES NVRAM administratively down down
FastEthernet0 10.1.1.10 YES manual up up
Serial0:0 unassigned YES unset down down
Serial0:1 unassigned YES unset down down
Serial0:2 unassigned YES unset down down
Serial0:3 unassigned YES unset down down
Serial0:4 unassigned YES unset down down
Serial0:5 unassigned YES unset down down
Serial0:6 unassigned YES unset down down
Serial0:7 unassigned YES unset down down
Serial0:8 unassigned YES unset down down
Serial0:9 unassigned YES unset down down
Serial0:10 unassigned YES unset down down
Serial0:11 unassigned YES unset down down
Serial0:12 unassigned YES unset down down
Serial0:13 unassigned YES unset down down
Serial0:14 unassigned YES unset down down
Serial0:15 unassigned YES unset down down
Serial0:16 unassigned YES unset down down
Serial0:17 unassigned YES unset down down
Serial0:18 unassigned YES unset down down
Serial0:19 unassigned YES unset down down
Serial0:20 unassigned YES unset down down
Serial0:21 unassigned YES unset down down
Serial0:22 unassigned YES unset down down
Serial0:23 unassigned YES unset down down
Enter the show running command:
hq-sanjose# show running
Building configuration...
Current configuration:
!
---- snip ----
!
interface Serial0:23
no ip address
no ip directed-broadcast
isdn incoming-voice modem