Technical data

Cisco AS5300 Configuration 2-13
Verify
• Enter the show running command:
hq-sanjose# show running
Building configuration...
Current configuration:
!
----- snip ----
!
isdn switch-type primary-ni
!
controller T1 0
framing esf
clock source line primary
linecode b8zs
pri-group timeslots 1-24
!
controller T1 1
framing esf
clock source line secondary
linecode b8zs
pri-group timeslots 1-24
!
controller T1 2
framing esf
clock source internal
linecode b8zs
pri-group timeslots 1-24
!
controller T1 3
framing esf
clock source internal
linecode b8zs
pri-group timeslots 1-24
!
----- snip ----
Tips
If you have trouble:
• Make sure the controller reports “up.”
• No errors should be reported in the current interval.