Technical data

Overview of Tasks

Dial Solutions Quick Configuration Guide

2-4

Overview of Tasks

Perform the following steps to conﬁgure the access server:

• Set up asynchronous shell services:

— “Step 1—Conﬁguring the Host Name, Password, and Time Stamps” on page 5

— “Step 2—Conﬁguring Local AAA Security” on page 6

— “Step 3—Conﬁguring the Fast Ethernet 100BaseT Interface” on page 8

— “Step 4—Commissioning the T1 Controllers” on page 10

— “Step 5—Conﬁguring the Serial Channels to Let Modem Calls Come in” on page 14

— “Step 6—Conﬁguring the Modems and Lines” on page 18

— “Step 7—Testing Async Shell Connections” on page 19

• Set up asynchronous PPP services:

— “Step 8—Setting Up IP Address Pools” on page 27

— “Step 9—Conﬁguring the Group-Async Interface” on page 28

— “Step 10—Testing Async PPP Connections” on page 31

• Set up synchronous PPP services:

— “Step 11—Conﬁguring DDR” on page 36

— “Step 12—Conﬁguring Deﬁnitions for Remote LAN Sites” on page 39

— “Step 13—Conﬁguring a Backhaul Routing Protocol” on page 41

— “Step 14—Conﬁrming the Final Running Conﬁguration” on page 42

— “Step 15—Saving the Conﬁguration” on page 44

— “Step 16—Testing Sync PPP Connections to Remote LANs” on page 44

— “Step 17—Adding More Remote LAN Sites as Needed” on page 44