Technical data

xviii Dial Solutions Quick Configuration Guide
Getting Help
Router(config-controller)# cas-group 1 timeslots 1-24 type e&m-fgb ?
dtmf DTMF tone signaling
mf MF tone signaling
service Specify the type of service
<cr>
Router(config-controller)# cas-group 1 timeslots 1-24 type e&m-fgb
In this example, the e&m-fgb keyword is
entered. After you enter the e&m-fgb
keyword, enter a ? to display what you
must enter next on the command line. In
this example, you can enter the dtmf, mf,
or service keyword to indicate the type of
channel-associated signaling available for
the e&m-fgb signaling type.
Because a <cr> is displayed, it indicates
that you can enter more keywords or press
<cr> to complete the command.
Router(config-controller)# cas-group 1 timeslots 1-24 type e&m-fgb dtmf ?
dnis DNIS addr info provisioned
service Specify the type of service
<cr>
Router(config-controller)# cas-group 1 timeslots 1-24 type e&m-fgb dtmf
In this example, the dtmf keyword is
entered. After you enter the dtmf keyword,
enter a ? to display what you must enter
next on the command line. In this example,
you can enter the dnis or service keyword
to indicate the options available for dtmf
tone signaling.
Because a <cr> is displayed, it indicates
that you can enter more keywords or press
<cr> to complete the command.
Router(config-controller)# cas-group 1 timeslots 1-24 type e&m-fgb dtmf
Router(config-controller)#
In this example, enter a <cr> to complete
the command.
Table 1 How to Find Command Options (Continued)
Command Comment