Installation guide

viii
Cisco ONS 15530 Hardware Installation Guide
OL-7706-01
Preface
New and Changed Information
Feature Release Description Location
4-channel tunable
10-Gbps ITU trunk card
12.2(26)SV If the 10-Gbps ITU trunk cards are
equipped with Universal Transponders
(UT1) that have tunable lasers, the cards
are programmable to one of the four
supported frequencies belonging to one
of the following bands: A, B, C, D, E, F,
G, or H.
“10-Gbps ITU Tunable Trunk
Cards” section on page 1-42
8-port multi-service
muxponder
12.2(25)SV The 8-port multi-service muxponder
transports a mix of different protocols
between sites in a metro DWDM network.
The protocols that can be aggregated and
transported range from high-speed
services to low-speed services.
“8-Port Multi-Service
Muxponders” section on page 1-33
“Installing SFPs into Aggregation
Cards and Muxponders” section on
page 2-18
“Installing SFP with Mini SMB
Coax Connectors” section on
page 2-18
“Connecting the 8-Port
Multi-Service Muxponder” section
on page 3-23
“8-Port Multi-Service Muxponder
Specifications” section on
page A-12
“SFP Specifications” section on
page A-16
4-port 1-Gbps/2-Gbps
FC aggregation card
12.2(23)SV The Cisco ONS 15530 supports a 4-port
1-Gbps/2-Gbps FC aggregation card for
Fibre Channel(FC), FICON, or ISC
traffic.
“4-Port 1-Gbps/2-Gbps FC
Aggregation Cards” section on
page 1-27
“Connecting the 4-Port
1-Gbps/2-Gbps FC Aggregation
Card” section on page 3-20
“4-Port 1-Gbps/2-Gbps FC
Aggregation Card” section on
page A-9
Variable rate SFP optics 12.1(12c)EV3 Variable rate SFP optics are available for
the ESCON aggregation card and the
8-port FC/GE aggregation card.
“ESCON Aggregation Cards”
section on page 1-25
“8-Port FC/GE Aggregation
Cards” section on page 1-30
8-port FC/GE
aggregation card
12.1(12c)EV The Cisco ONS 15530 supports an 8-port
Fibre Channel/Gigabit Ethernet
aggregation card for FC and GE traffic.
“8-Port FC/GE Aggregation
Cards” section on page 1-30
“Connecting the 8-Port FC/GE
Aggregation Card” section on
page 3-21