Installation guide

Contents

Cisco ONS 15530 Hardware Installation Guide

OL-7706-01

Removing SFP from Aggregation Cards and Muxponders 2-19

Removing Pull Tab SFPs with RJ-45 Connectors 2-19

Removing Non-Pull Tab SFPs with RJ-45 Connectors 2-20

Removing SFP Optics with MT-RJ Connectors 2-21

Removing SFP Optics with LC Connectors 2-23

Removing SFPs with Mini SMB Coax Connectors 2-24

Installing and Removing Modules 2-24

Installing OADM Modules and PSMs 2-24

Installing OSC Modules, WB-VOA Modules, and PB-OE Modules 2-25

Removing Modules 2-26

Replacing the Fan Assembly 2-27

Power Guidelines 2-29

Power Connection Guidelines for DC-Powered Systems 2-30

Plant Wiring Guidelines 2-30

Interference Considerations 2-30

Cabling Guidelines 2-31

Powering Up the Shelf 2-31

Connecting DC-Input Power 2-32

Connecting AC-Input Power 2-33

Installing and Removing the Power Supplies 2-35

CHAPTER

3 Connecting the Cisco ONS 15530 3-1

Connector Types 3-2

Preparing for Network Connections 3-3

Cleaning the Shelf and Connectors 3-4

Connecting the CPU Switch Module 3-5

Ethernet Network Management Cable Connections 3-5

Connecting to a 10BASE-T Ethernet Network 3-5

Connecting to a 100BASE-T Ethernet Network 3-7

Connecting a Terminal to the Console Port 3-9

Auxiliary Modem Connection 3-11

Connecting the OSC Module 3-13

Connecting the PSM 3-14

Cabling PSMs 3-15

Connecting the Transponder Line Card 3-17

Connecting the OADM Module 3-19

Connecting the ESCON Aggregation Card 3-20

Connecting the 4-Port 1-Gbps/2-Gbps FC Aggregation Card 3-20