Installation guide

Contents

Cisco ONS 15530 Hardware Installation Guide

OL-7706-01

OSC Modules and Carrier Motherboards 1-14

OSC Module LEDs 1-15

PSMs 1-15

PSM LEDs 1-16

Transponder Line Cards 1-17

Transponder Line Card LEDs 1-20

OADM Modules 1-20

Wide-Band Variable Optical Attenuator and Per-Band Optical Equalizer Modules 1-21

ESCON Aggregation Cards 1-25

4-Port 1-Gbps/2-Gbps FC Aggregation Cards 1-27

8-Port FC/GE Aggregation Cards 1-30

8-Port Multi-Service Muxponders 1-33

2.5-Gbps ITU Trunk Cards 1-36

10-Gbps ITU Trunk Cards 1-39

10-Gbps ITU Tunable Trunk Cards 1-42

10-Gbps Uplink Cards 1-45

CHAPTER

2 Installing the Cisco ONS 15530 2-1

Before Installing 2-1

Unpacking and Inspecting the Shelf 2-2

Mounting the Shelf 2-2

Chassis-Lifting Guidelines 2-2

Rack-Mounting the Shelf 2-4

General Rack-Mount Installation Guidelines 2-5

Flush-Mounting the Cisco ONS 15530 CHAS-N in a 19-Inch Rack 2-5

Flush-Mounting the Cisco ONS 15530 CHAS-E in a 21-Inch Rack 2-7

Attaching the Air Ramp Baffle 2-10

Installing the Fiber Routing Management System 2-12

Installing the Fiber Routing Tray 2-13

Installing the Fiber Routing Drawer 2-14

Grounding the Shelf 2-14

Shelf Grounding Guidelines 2-14

Shelf Grounding Procedures 2-14

Preventing ESD Damage 2-17

Installing and Removing Line Cards or Motherboards 2-17

Installing Line Cards or Motherboards 2-17

Removing Line Cards or Motherboards 2-18

Installing SFPs into Aggregation Cards and Muxponders 2-18

Installing SFP with Mini SMB Coax Connectors 2-18